centos中lvs安装配置方法详解-巨人网络通讯

centos中lvs安装配置方法详解

一、lvs-nat模式

网络配置：

复制代码

代码如下:

lvs-server eth0 ：host-only adapter 192.168.56.101
lvs-server eth1 ：Internal 192.168.0.1
real-server-1 eth0：Internal 192.168.0.2
real-server-2 eth0：Internal 192.168.0.3

lvs-server：
1、安装ipvsadm软件

复制代码

代码如下:

yum -y install ipvsadm*
echo 1 > /proc/sys/net/ipv4/ip_forward 路由器功能，ip转发
ipvsadm -C
ipvsadm -At 192.168.56.101:80 -s rr 轮叫模式
ipvsadm -at 192.168.56.101:80 -r 192.168.0.2 -m
ipvsadm -at 192.168.56.101:80 -r 192.168.0.3 -m
ipvsadm -L -n

2、real-server-1：

复制代码

代码如下:

ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1

3、real-server-2

复制代码

代码如下:

ifconfig eth0 192.168.0.3 netmask 255.255.255.0
route add default gw 192.168.0.1
route -n 查看路由表

二、lvs-ipturn

网络配置：

复制代码

代码如下:

lvs-server eth0：host-only adapter 192.168.56.101
real-server-1 eth0：host-only adapter 192.168.56.102
real-server-2 eth0：host-only adapter 192.168.56.103

lvs-server：
配置虚拟ip即vip

复制代码

代码如下:

ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0/p> p>ivsadm -C
ipvsadm -At 192.168.56.10:80 -s rr
ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -i
ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -i
ipvsadm -L -n

real-server-1：

复制代码

代码如下:

ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

real-server-2：

复制代码

代码如下:

三、lvs-dr

网络配置：

复制代码

代码如下:

lvs-server eth0：host-only adapter 192.168.56.101/p> p>real-server-1 eth0：host-only adapter 192.168.56.102/p> p>real-server-2 eth0：host-only adapter 192.168.56.103/p> p>lvs-server：/p> p>ifconfig eth0:0 192.168.56.10 netmask 255.255.255.255/p> p>route add -host 192.168.56.10 dev eth0:0

ipvs:

复制代码

代码如下:

ipvsadm -C ipvsadm -At 192.168.56.10:80 -s rr ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -g ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -g ipvsadm -L -n/p> p>real-server-1： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce/p> p>real-server-2： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

上一篇：centos6.4安装CloudStack 4.2(开源云计算平台)详解
下一篇：centos中文乱码修改字符编码使用centos支持中文